multi-resource buffer
Posted: Sun Nov 19, 2017 11:32 am
this is not a ready-made scheme, it's like something like solving a puzzle.
the main problem was to make so that only one of the many one-type signals was active. I decided this with the help of "priority." in the scheme there is a common network in which the signals go from left to right. Also each station has two sensors, first looks only at the locomotive, the second looks at the common network and the first sensor.
If the common network has the same signals as in the first sensor, then the second sensor does not miss them. as a result, left signals block the right signals, and on the output of all the second sensors there are only "original" signals, which are also "addresses", for sending the command to the train
the main problem was to make so that only one of the many one-type signals was active. I decided this with the help of "priority." in the scheme there is a common network in which the signals go from left to right. Also each station has two sensors, first looks only at the locomotive, the second looks at the common network and the first sensor.
If the common network has the same signals as in the first sensor, then the second sensor does not miss them. as a result, left signals block the right signals, and on the output of all the second sensors there are only "original" signals, which are also "addresses", for sending the command to the train
BLUEPRINT
how it all works -https://youtu.be/nas71e_Ppho