Page 2 of 6
Re: Version 0.11.1
Posted: Fri Oct 31, 2014 11:28 pm
by Salmelu
Multiplayer not working for us over the LAN. Tried to host on windows/linux 64bit, firewall checked, and the game doesn't open port 34197 as stated in the update. Checked with nmap for both computers, the ports remain closed after setting up the game. Any idea how to fix that?
Re: Version 0.11.1
Posted: Fri Oct 31, 2014 11:32 pm
by cartmen180
Salmelu wrote:Multiplayer not working for us over the LAN. Tried to host on windows/linux 64bit, firewall checked, and the game doesn't open port 34197 as stated in the update. Checked with nmap for both computers, the ports remain closed after setting up the game. Any idea how to fix that?
ports do not apply on lan, only when playing over the internet. What exactly is the error you get?
Re: Version 0.11.1
Posted: Fri Oct 31, 2014 11:34 pm
by cartmen180
played for 3 hours without a problem! very nice
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 12:23 am
by Boogieman14
Salmelu wrote:Multiplayer not working for us over the LAN. Tried to host on windows/linux 64bit, firewall checked, and the game doesn't open port 34197 as stated in the update. Checked with nmap for both computers, the ports remain closed after setting up the game. Any idea how to fix that?
If you're running a local firewall, you will need to open up this specific port in the firewall. Factorio likely won't do that for you. Only after you've opened up the port in the firewall, will it show up using nmap.
cartmen180 wrote:ports do not apply on lan, only when playing over the internet. What exactly is the error you get?
Ports definitely apply on lan as well, it's just usually a bit simpler because no NAT (network address translation) is involved, so no portforwarding required.
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 12:42 am
by Xabi
Im playing now for over 7h in Multiplayer via Hamachi with 2 other friends. I think for the first MP version its pretty good.
This is our base atm:
When huge biterwaves attack us, the game begins to lag for all of us. Sometimes we got 1frame/5sec, but its acceptable for this first mp version
Great Job Dev's, keep the work up
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 12:46 am
by hangphyr
When will the full download be up on the experimental download page?
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 12:50 am
by Sebelas
Me and a friend of mine are having an issue.
We're playing over the internet, I have set up port forwarding and have a static public IP, not using Hamachi or anything. We've managed to play for a good 2-3 hour session. Maybe in excess of 8, time flies when you're building a dream.
Anyways every so often the game will freeze and become unresponsive, if the client (connector) Alt-F4's his client the game will free up for me (host) and he can reconnect and continue as normal, it wasn't an issue when it happened every 30-40 mins however as our death machine took a bigger form the issue seems to be more and more frequent, eventually it reached the point where he could no longer connect, upon successful connection he downloads the map and when this completes is immediately kicked, in and only in this circumstance do I see the message "Player x Desync! Player will reconnect" and then proceeds to re-download the map, this seems to repeat indefinitely, or as long as patience allows.
I have a decent upload rate, for this country (about 1meg up, 10mbit) and I have tried adjusting the latency slider upon game creation to no avail. We haven't tried Hamachi yet but will give this a go tomorrow, I also own a windows VPS so I will attempt to run the client there and we can both try connecting, I will report back on findings but hopes are not high for either option in all honesty.
We haven't noticed any triggers to this event specifically, though I did observe sometimes it happened more often when we were closer together, this wasn't consistent though as when we staged an elongated assault on our neighbourly inhabitants we were able to complete it without any events.
The only thing that was for sure was it occurred more frequently as the factory got larger.
Re: Version 0.11.1 Starting a multiplayer game
Posted: Sat Nov 01, 2014 1:27 am
by IcePrince
My friend and I are trying to play the multiplayer, and he has port forwarded, but whenever I try and connect to his IP I get ""Could not establish connection to server" and it won't let me play with him. I am not sure if it's because his port is wrong, he is using 25565, or if it has something to do with our setups. I just want to play
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 1:42 am
by pokemonfirer
am i the only one still not able to even start it up
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 2:24 am
by Airat9000
with a dynamic IP address you will be able to play through what-if?
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 2:57 am
by Sparkerish
kingorkami wrote:Cordylus wrote:I can't play now.
Not enough video memory...
On 0.10 all was working fine.
Make it two of us
Make it 3,
Same problem, Same message.
@ slpwnd Graphic settings? you mean in the config.ini "low-graphics=true"?
if there are more places to adjust graphics please let me know. (game will not launch so I have no buttons to click, must be changed in files/code)
GRRR...
...I really wanted to play
My friend uses win xp so I guess we will have to wait til that is fixed to play MP anyway. But I REALLY wanted to check out the new tanks, gates etc.
My laptop has always required low graphics mode to even launch the game. Previously Dytech would overload graphics but after it went modular it worked.
'Sigh' I need a new computer
AWESOME game Keep up the great work
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 3:21 am
by chainedlupine
Airat9000 wrote:with a dynamic IP address you will be able to play through what-if?
I play using a dynamic IP.
As far as I can tell, the game doesn't use DNS to resolve the connect input field, so you have to enter your outward-facing IP (and have appropriate NATing setup) for it to work.
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 3:23 am
by chainedlupine
I notice in all of these "couldn't create atlas bitmap" errors, they have a non-power-of-two size of 512x459. I wonder if some drivers or video cards are choking on that?
Theoretically, based on modern video card capabilities, creating non-POW sized textures hasn't been an issue since 2005 or so, but maybe some people are using integrated cards or older cards?
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 5:02 am
by Koordinator-O
if i try to start level 3 of the story i get this message:
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 6:00 am
by Rakshasa
Code: Select all
...s/Games/factorio_0.11.app/Contents/data/trailer|data.lua:151: attempt to index field 'created_effect' (a nil value)
This happens when trying to start the client on OSX Mavericks.
Edit: Worked around this by deleting the trailer mod.
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 8:34 am
by slpwnd
Sparkerish wrote:kingorkami wrote:Cordylus wrote:I can't play now.
Not enough video memory...
On 0.10 all was working fine.
Make it two of us
Make it 3,
Same problem, Same message.
@ slpwnd Graphic settings? you mean in the config.ini "low-graphics=true"?
if there are more places to adjust graphics please let me know. (game will not launch so I have no buttons to click, must be changed in files/code)
GRRR...
...I really wanted to play
My friend uses win xp so I guess we will have to wait til that is fixed to play MP anyway. But I REALLY wanted to check out the new tanks, gates etc.
My laptop has always required low graphics mode to even launch the game. Previously Dytech would overload graphics but after it went modular it worked.
'Sigh' I need a new computer
AWESOME game Keep up the great work
Sorry for the inconvenience.
1. What is your system specs? (operating system, amount of RAM, graphic card spec + VRAM info)
2. Do you use any mods? Have you tried just vanilla?
3. Try to play in the config with combination of low-graphics set to true and bitmap-caching set to very-low.
Maybe the best would be to move this to a bug report thread.
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 8:43 am
by JamesOFarrell
Thank you so much guys. Today has been 8 hours of pure multilayer awesome played over 3 continents. We made it to purple science and were starting on modules when we took a break. You guys have outdone yourself again!
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 8:58 am
by redfish71
After the update I have serious performance issues. My Last game in 0.10.2 worked good. I had a huge game with more than 50 hours of gameplay. Now I only get 15fps even on lowest settings. The game is no longer enjoyable to me. I'll try it with a new game, but still a bit dissapointed
(
I think previous releases the game rendered all frames. So the total gameplay slowed down a bit but it would still appear smooth. Now to keep in Sync the game skips a lot of frames and it feels jittery and laggy.
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 8:59 am
by logris
Koordinator-O wrote:if i try to start level 3 of the story i get this message:
I had this same issue, and you can fix it by opening up the control.lua file in data\base\campaigns\beta\level-03 and changing the line
to
Code: Select all
recipelist["stone-wall"].enabled = true
They changed the name of the wall, and it falls over when it looks for the old name.
I had to change it in all 4 levels of the campaign.
Re: Version 0.11.1
Posted: Sat Nov 01, 2014 9:53 am
by hedgehog
Please help - I can't get the update!
I turned on automatic updates, then off, then on again. Nothing happened! Factorio came up with the log in box, I logged in
Factorio responds: "no update found"
I tried re downloading it, but it is not there to be downloaded!
How can I get 11.1?
Could this be anything to do with not filling in the "updater proxy server"?